23 Craftsman Screwdrivers

slotted: 3/32 X 2, 1/8 X 2, 1/8 X 4, 3/16 X 4, 3/16 X 8, 3/16 X 9, 1/4 X 1-1/2, 1/4 X 4, 1/4 X 6, 5/16 X 6 (left side)

Phillips: p0 X 1-1/2, p0 X 2-1/2, p1 X 3, p2 X 1-1/2, p2 X 4, p2 X 8, p3 X 6 (right side)

torx: T10, T15, T20, T25, T30

other: Craftsman Scratch Awl 41028

Details

This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 23 Craftsman screwdrivers:

slotted: 3/32 X 2, 1/8 X 2, 1/8 X 4, 3/16 X 4, 3/16 X 8, 3/16 X 9, 1/4 X 1-1/2, 1/4 X 4, 1/4 X 6, 5/16 X 6 (left side)

Phillips: p0 X 1-1/2, p0 X 2-1/2, p1 X 3, p2 X 1-1/2, p2 X 4, p2 X 8, p3 X 6 (right side)

torx: T10, T15, T20, T25, T30

other: Craftsman Scratch Awl 41028

This organizer is designed to fit a standard Craftsman toolbox drawer with inner dimensions of:

22-1/4 X 16-1/4 inches
(inside width by inside length)

A great gift for someone who loves tools. Made in the USA!

Note: screwdrivers are not included

Please verify this organizer fits your screwdrivers before placing an order.

1. Download the drawing: www.FoamFitTools.com/product/F1M-00076.pdf
2. Print the pages of the drawing full size (page scaling = none).
3. Assemble the pages and place the printed drawing in your toolbox drawer.
4. Place the tools over the printed outlines. Visually check that each screwdriver fits within its outline.

More Details

This foam insert is designed for shadowing screwdrivers inside a toolbox drawer, and is made from high-quality tool foam with precision-cut pockets. The pockets are cut up to 0.500 inches deep in tool foam that is 0.750 inches thick.

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Two color combinations, black with red and blue with yellow, are available. The foam is resistant to most oils and fuels.