Contact Us | Drawing and Part Number Lookup 920-569-0140
107 Craftsman 3/8-drive Sockets with Ratchet, Extensions, and Adapter
Fits (36) inch 3/8-drive sockets,
(43) metric 3/8-drive sockets,
(12) hex bit sockets,
(16) screwdriver bit and torx sockets,
and (1) adapter.
Accommodates the 3/8-drive sockets and drive tools from the 334-piece mechanics tool set 35334.
22-1/4 X 14-1/2 inches
(13) 3/8-drive 6-point sizes from 1/4 to 1
(5) 3/8-drive 8-point sizes from 1/4 to 1/2
(10) 3/8-drive 12-point sizes from 1/4 to 13/16
(8) 3/8-drive 12-point deep sizes from 3/8 to 7/8
(17) 3/8-drive 6-point sizes from 6 to 22
(15) 3/8-drive 12-point sizes from 6 to 19 plus 21
(11) 3/8-drive 12-point deep sizes from 9 to 19
(6) 3/8-drive hex bit sizes from 5/32 to 3/8
(6) 3/8-drive hex bit sizes from 4 to 8 plus 10
(3) 3/8-drive slotted screwdriver bits from 7/32 to 3/8
(3) 3/8-drive Phillips screwdriver bits from P1 to P3
(6) 3/8-drive Torx screwdriver bits from T27 to T50
(4) 3/8-drive external Torx sockets from E10 to E16
3/8-drive quick release teardrop ratchet (Craftsman 44808)
1-1/2-inch extension bar, 3/8-drive (Craftsman 43537)
3-inch extension bar, 3/8-drive (Craftsman 44264)
6-inch extension bar, 3/8-drive (Craftsman 44261)
3/8-drive to 1/4 socket adapter (Craftsman 04256)
This tool organizer was designed to fit the 3/8-drive sockets and drive tools from the Craftsman 334-piece set 35334. The pockets are sized to fit sockets that don't have "U.S.A." markings.
21-3/4 X 14-3/16 inches
Note: Trimmed organizers are not returnable.
Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.
black/yellow, black/green, black/gray
contact customer service to order this organizer in a special color.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.