FoamFit Tools section divider

Foam Tool Organizer for
3 Craftsman Industrial Ratchets with Drive Tools and 14 Hex Keys

see all organizers for ratchets and drive tools

Overview

3 Craftsman Industrial Ratchets with Drive Tools and 14 Hex Keys

Fits (3) quick-release ratchets,
(8) drive accessories,
(14) inch hex keys,
(14) metric hex keys,
and (1) magnetic handle with (10) bits.

Accommodates the ratchets, drive accessories, and hex keys from the Craftsman Industrial 255-piece mechanics tool set 29794.

Drawer Size
22-1/4 X 16-1/4 inches

$50.20



FoamFit Tools section divider

Details

This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 50 Craftsman Industrial tools:

1/2-drive quick-release ratchet (Craftsman Industrial 23805)
3/8-drive quick-release ratchet (Craftsman Industrial 23795)
1/4-drive quick-release ratchet (Craftsman Industrial 23790)
1/4-drive 6-inch spinner handle (Craftsman 43372)
1/4-drive to 3/8 socket adapter (Craftsman Industrial 23823)
2-inch extension bar, 1/2-drive (Craftsman Industrial 23857)
6-inch extension bar, 1/2-drive (Craftsman Industrial 02386)
3-inch extension bar, 3/8-drive (Craftsman Industrial 23833)
6-inch extension bar, 3/8-drive (Craftsman Industrial 23834)
3-inch extension bar, 1/4-drive (Craftsman Industrial 23817)
6-inch extension bar, 1/4-drive (Craftsman Industrial 23818)
magnetic bit handle (Craftsman 43373) with 10 bits
14-pc inch hex key set (Craftsman Industrial 46683)
14-pc metric hex key set (Craftsman Industrial 46684)

This tool organizer was designed to fit the ratchets, drive accessories, and hex keys from the Craftsman Industrial 255-piece set 29794.

free shipping within the contiguous 48 US states

Free shipping on all orders within the contiguous 48 US states.



Made in the USA!

Foam Organizer for Craftsman Industrial Ratchets, Extensions, Hex Keys, and Magnetic Bit Set from the 255-Piece Mechanics Tool Set

note: tools are not included

Drawer Size

This organizer is designed to fit a toolbox drawer with inner dimensions of:

22-1/4 X 16-1/4 inches (inside width by inside depth)

It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 21-3/4 X 16 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.

Drawing

Please verify this organizer fits your tools before placing an order.

  1. Download the drawing: www.FoamFitTools.com/product/F1M-01101.pdf
  2. Print the pages of the drawing full size or 100% (not fit).
  3. Check that the printout is full size by measuring the border with a ruler.
  4. Assemble the pages and place the printed drawing in your toolbox drawer.
  5. Place the tools over the printed outlines. Visually check that each tool fits within its outline.

Additional Information

Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.

Black and Red, Blue and Yellow, and Black and Blue Tool Foam
FoamFit Tools section divider

FoamFit Tools Facebook Site FoamFit Tools YouTube Channel FoamFit Tools Pinterest Site