FoamFit Tools section divider

Foam Tool Organizer for
20 Craftsman Flat Full-Polish Ratcheting Wrenches, Non-USA Version 1

see all organizers for Craftsman ratcheting wrenches


20 Craftsman Flat Full-Polish Ratcheting Wrenches, Non-USA Version 1

Fits (10) non-reversible inch ratcheting wrenches and (10) non-reversible metric ratcheting wrenches.

Accommodates the full-polish ratcheting wrenches from version 1 of set 41220 or 46820.

Only fits the longer version without USA markings. See details for wrench lengths.

Drawer Size
22-1/4 X 16-1/4 inches


FoamFit Tools section divider


inch flat full-polish ratcheting wrenches:
1/4 (Craftsman 39230), 5 inches long
5/16 (Craftsman 42560), 5-13/16 inches long
11/32 (Craftsman 47613), 6-1/4 inches long
3/8 (Craftsman 42561), 6-3/4 inches long
7/16 (Craftsman 42562), 7-3/8 inches long
1/2 (Craftsman 42563), 8-1/4 inches long
9/16 (Craftsman 42564), 8-13/16 inches long
5/8 (Craftsman 42565), 9-5/8 inches long
11/16 (Craftsman 42566), 10-1/8 inches long
3/4 (Craftsman 42567), 11-1/8 inches long

metric flat full-polish ratcheting wrenches:
6mm (Craftsman 39240), 5 inches long
8mm (Craftsman 42568), 5-7/8 inches long
10mm (Craftsman 42569), 6-3/4 inches long
12mm (Craftsman 42570), 7-13/16 inches long
13mm (Craftsman 42571), 8-5/16 inches long
14mm (Craftsman 42572), 8-3/4 inches long
15mm (Craftsman 42573), 9-1/4 inches long
16mm (Craftsman 39238), 9-9/16 inches long
17mm (Craftsman 42575), 10-1/4 inches long
18mm (Craftsman 42576), 10-11/16 inches long

free shipping within the contiguous 48 US states

Free shipping on all orders within the contiguous 48 US states.

Made in the USA!

Foam Organizer for Craftsman 20-Piece Non-Reversible Full Polish Ratcheting Wrench Set

note: tools are not included

Tool Requirements

This tool organizer was designed to fit version 1 of the 20-Piece Craftsman ratcheting wrench set 41220 or 46820. The pockets fit full-polish, non-reversible wrenches that do not have "U.S.A." markings. This organizer only fits the longer version of these wrenches, so please verify your wrench lengths before ordering.

Possible Modifications

Minimum trimmable size:

21-3/4 X 16 inches

Note: Trimmed organizers are not returnable.

Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.

Colors by special request:

black/yellow, black/green, black/gray

contact customer service to order this organizer in a special color.


Please verify this organizer fits your tools before placing an order.

  1. Download the drawing:
  2. Print the pages of the drawing full size or 100% (not fit).
  3. Check that the printout is full size by measuring the border with a ruler.
  4. Assemble the pages and place the printed drawing in your toolbox drawer.
  5. Place the tools over the printed outlines. Visually check that each tool fits within its outline.

Additional Information

Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.

Black and Red, Blue and Yellow, and Black and Blue Tool Foam
FoamFit Tools section divider

FoamFit Tools Facebook Site FoamFit Tools YouTube Channel FoamFit Tools Pinterest Site