Foam Tool Organizer for
10 Craftsman Pliers with Wire Strippers and Snap Ring Pliers

Overview

10 Craftsman Pliers with Wire Strippers and Snap Ring Pliers

Fits (8) solid joint pliers from set 50494,
6-3/4 inch slip joint pliers,
9-1/2 inch arc joint pliers,
(1) retaining ring pliers,
and (1) wire stripper.

Drawer Size
22-1/4 X 14-1/2 inches

$49.80



Foam Organizer for 10 Craftsman Pliers with Wire Strippers and Snap Ring Pliers

larger image

Foam Organizer for 10 Craftsman Pliers with Wire Strippers and Snap Ring Pliers

larger image

note: tools are not included

Tool List

Precision CNC-cut to fit 12 Craftsman pliers:

8 inch duck bill (Craftsman 45087)
8 inch long reach (Craftsman 45085)
8 inch long nose (Craftsman 45103)
6 inch long nose (Craftsman 45102)
6-1/2 inch bent nose (Craftsman 45104)
6-3/4 inch slip joint pliers (Craftsman 45378)
9-1/2 inch arc joint pliers (Craftsman 45381)
6 inch diagonal cutter (Craftsman 45075)
7 inch diagonal cutter (Craftsman 45076)
7 inch linesman (Craftsman 45093)
internal/external retaining ring pliers (Craftsman 47412)
wire cutter/stripper pliers (Craftsman 73573)

Tool Notes

The pliers listed above were available as Craftsman 8-piece set 50494 plus Craftsman 6-3/4-inch slip-joint pliers 45378, 9-1/2-inch arc-joint pliers 45381, snap-ring pliers 47412, and wire stripper 73573.

Drawing

Drawing F1M-01450.pdf

Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.

Drawer Size

22-1/4 X 14-1/2 inches (inside width by inside depth)

Drawer Height

Works in most drawers, needing no more than 2 inches of vertical clearance.

Minimum Trimmable Size

It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:

22 X 14 inches

Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.

Features and Benefits

Standard Colors

black over red color combination blue over yellow color combination black over blue color combination

Special Colors

We make these colors in smaller batches, but they are often in stock. Contact customer service to order.

black over yellow color combination black over green color combination black over gray color combination

Additional Information

Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.

Free Shipping!

For orders within the contiguous 48 US states.

US flag

Made in the USA!