Contact Us | Drawing and Part Number Lookup 920-569-0140
3 Craftsman Ratchets with 24 Extensions and Accessories
Fits (3) ratchets,
(1) flex handle,
(1) spinner handle,
and (3) universal joints.
Accommodates the newer 21-pc Craftsman drive tool accessory set 42283.
Also accommodates the 3-pc Craftsman thin-profile ratchet set 44992 and 3 other tools.
22-1/4 X 14-1/2 inches
1/2-drive thin-profile 84-tooth ratchet (Craftsman 44996)
3/8-drive thin-profile 84-tooth ratchet (Craftsman 44995)
1/4-drive thin-profile 84-tooth ratchet (Craftsman 44994)
1/4-drive spinner handle (Craftsman 43372)
1/2-drive to 3/4 socket adapter (Craftsman 04271)
1/2-drive to 3/8 socket adapter (Craftsman 04259)
3/8-drive to 1/2 socket adapter (Craftsman 04258)
3/8-drive to 1/4 socket adapter (Craftsman 04256)
1/4-drive to 3/8 socket adapter (Craftsman 04257)
1/2-drive universal joint (Craftsman 04425)
3/8-drive universal joint (Craftsman 04435)
1/4-drive universal joint (Craftsman 04280)
2-inch extension bar, 1/2-drive (Craftsman 43522)
3-inch extension bar, 1/2-drive (Craftsman 44133)
6-inch extension bar, 1/2-drive (Craftsman 44131)
10-inch extension bar, 1/2-drive (Craftsman 44132)
20-inch extension bar, 1/2-drive (Craftsman 44134)
1-1/2-inch extension bar, 3/8-drive (Craftsman 43537)
3-inch extension bar, 3/8-drive (Craftsman 44264)
6-inch extension bar, 3/8-drive (Craftsman 44261)
10-inch extension bar, 3/8-drive (Craftsman 44262)
20-inch extension bar, 3/8-drive (Craftsman 44263)
1-1/2-inch extension bar, 1/4-drive (Craftsman 43538)
3-inch extension bar, 1/4-drive (Craftsman 43539)
6-inch extension bar, 1/4-drive (Craftsman 43531)
14-inch extension bar, 1/4-drive (Craftsman 43532)
15-inch flex handle/breaker bar, 1/2-drive (Craftsman 44201)
This tool organizer was designed to fit the Craftsman 21-pc drive tool accessory set 42283, the 3-pc ratchet set 44992, flex handle 44201, spinner handle 43372, and 1 additional extension 44134. The pockets are sized to fit newer Craftsman tools without "U.S.A." markings.
21-11/16 X 14-1/4 inches
Note: Trimmed organizers are not returnable.
Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.
black/yellow, black/green, black/gray
contact customer service to order this organizer in a special color.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.