Fits (40) inch sockets, (40) metric sockets, (2) 3/8-drive ratchets, (4) extensions, (2) drive adapters, flex handle, and swivel.
Accommodates the 3/8-drive sockets and drive tools from the Husky 432-pc set H432MTS.
Drawer Size
20-3/8 X 15-11/16 inches
$49.50
larger image
note: tools are not included
Precision CNC-cut to fit 90 Husky sockets and other tools:
(13) 3/8-drive 6-point sizes from 1/4 to 1
(5) 3/8-drive 8-point sizes from 1/4 to 1/2
(10) 3/8-drive 12-point sizes from 5/16 to 7/8
(10) 3/8-drive 6-point deep sizes from 5/16 to 7/8
(2) 3/8-drive spark plug socket sizes 5/8 and 13/16
(17) 3/8-drive 6-point sizes from 6 to 22
(12) 3/8-drive 12-point sizes from 9 to 19 plus 21
(11) 3/8-drive 6-point deep sizes from 9 to 19
3/8-drive full-polish quick-release ratchet
3/8-drive full-polish flex-head ratchet
3/8-drive X 1-1/2 extension bar
3/8-drive X 3 extension bar
3/8-drive X 6 extension bar
3/8-drive X 6 wobble extension bar
3/8-drive X 10 flex handle (breaker bar)
3/8-drive to 1/4-drive adapter
3/8-drive to 1/2-drive adapter
3/8-drive universal joint
This tool organizer was designed to fit the 3/8-drive sockets, ratchets, and drive tools from the Husky 432-pc set H432MTS.
Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.
20-3/8 X 15-11/16 inches (inside width by inside depth)
Works in most drawers, needing no more than 2 inches of vertical clearance.
It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:
20-1/8 X 15 inches
Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.
We make these colors in smaller batches, but they are often in stock. Contact customer service to order.
Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.