187 Husky Sockets with 5 Ratchets and 19 Drive Tools
Fits (95) inch sockets, (92) metric sockets, (5) ratchets, (10) extensions, (4) drive adapters, (2) flex handles, and (3) swivels.
Accommodates the sockets and drive tools from the Husky 432-pc set H432MTS.
Does not include pockets for the hex bit sockets, torx bit sockets, or screwdriver bit sockets.
Caution: Recommended for a 3-1/2 inch or deeper drawer.
36-3/8 X 15-11/16 inches
(11) 1/4-drive 6-point sizes from 5/32 to 9/16
(10) 1/4-drive 12-point sizes from 3/16 to 9/16
(11) 1/4-drive 6-point deep sizes from 5/32 to 9/16
(14) 1/4-drive 6-point sizes from 3.5 to 14
(11) 1/4-drive 6-point deep sizes from 4 to 14
(13) 3/8-drive 6-point sizes from 1/4 to 1
(5) 3/8-drive 8-point sizes from 1/4 to 1/2
(10) 3/8-drive 12-point sizes from 5/16 to 7/8
(10) 3/8-drive 6-point deep sizes from 5/16 to 7/8
(2) 3/8-drive spark plug socket sizes 5/8 and 13/16
(17) 3/8-drive 6-point sizes from 6 to 22
(12) 3/8-drive 12-point sizes from 9 to 19 plus 21
(11) 3/8-drive 6-point deep sizes from 9 to 19
(12) 1/2-drive 12-point sizes from 3/8 to 1-1/16
(11) 1/2-drive 12-point deep sizes from 3/8 to 1
(14) 1/2-drive 12-point sizes from 9 to 22
(13) 1/2-drive 12-point deep sizes from 9 to 19, plus 21 and 22
1/4-drive full-polish quick-release ratchet
3/8-drive full-polish quick-release ratchet
1/2-drive full-polish quick-release ratchet
3/8-drive full-polish flex-head ratchet
1/2-drive full-polish flex-head ratchet
1/4-drive X 2 extension bar
1/4-drive X 3 extension bar
1/4-drive X 6 wobble extension bar
3/8-drive X 1-1/2 extension bar
3/8-drive X 3 extension bar
3/8-drive X 6 extension bar
3/8-drive X 6 wobble extension bar
1/2-drive X 3 extension bar
1/2-drive X 5 extension bar
1/2-drive X 10 wobble extension bar
1/4-drive to 3/8 drive adapter
3/8-drive to 1/4-drive adapter
3/8-drive to 1/2-drive adapter
1/2-drive to 3/8-drive adapter
3/8-drive X 10 flex handle (breaker bar)
1/2-drive X 15 flex handle (breaker bar)
1/4-drive universal joint
3/8-drive universal joint
1/2-drive universal joint
This tool organizer was designed to fit the sockets, ratchets, and drive tools from the Husky 432-pc set H432MTS.
35-7/8 X 15-7/16 inches
Note: Trimmed organizers are not returnable.
Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.
black/yellow, black/green, black/gray
contact customer service to order this organizer in a special color.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.