Contact Us |
Drawing and Part Number Lookup
920-569-0140
Foam Tool Organizer for
14 Craftsman Gunmetal Combination Wrenches with 16 Hex Keys
Overview
14 Craftsman Gunmetal Combination Wrenches with 16 Hex Keys
Fits (7) inch wrenches from 3/8 to 3/4, (7) metric sizes 10 and 12 to 17 mm, (16) hex keys.
Accommodates the combination wrenches and hex keys from the Craftsman 150-piece gunmetal chrome mechanics set CMMT12035.
Only fits the long pattern wrenches with diagonal markings.
Drawer Size
22-1/4 X 16-1/4 inches
$53.40
Details
- Drawer size: 22-1/4 X 16-1/4 inches (inside width by inside depth)
- Standard colors: black/red, blue/yellow, black/blue
- Made from closed-cell polyethylene tool foam.
- Precision CNC-cut to fit 30 Craftsman tools:
inch wrench sizes:
3/8 (Craftsman 81-993)
7/16 (Craftsman 81-994)
1/2 (Craftsman 81-995)
9/16 (Craftsman 81-996)
5/8 (Craftsman 81-997)
11/16 (Craftsman 81-998)
3/4 (Craftsman 81-999)
metric wrench sizes:
10 mm (Craftsman 81-971)
12 mm (Craftsman 81-973)
13 mm (Craftsman 81-974)
14 mm (Craftsman 81-975)
15 mm (Craftsman 81-976)
16 mm (Craftsman 81-977)
17 mm (Craftsman 81-978)
(8) hex keys from 1/16 to 1/4 in holder
(8) hex keys from 1.5 to 6 mm in holder
Free shipping on all orders within the contiguous 48 US states.
Made in the USA!
note: tools are not included
Tool Requirements
This tool organizer was designed to fit all the combination wrenches and the hex keys from the Craftsman 150-piece gunmetal chrome set CMMT12035.
Possible Modifications
Minimum trimmable size:
21-3/4 X 14 inches
Note: Trimmed organizers are not returnable.
Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.
Colors by special request:
black/yellow, black/green, black/gray
contact customer service to order this organizer in a special color.
Drawing
Please verify this organizer fits your tools before placing an order.
- Download the drawing: www.FoamFitTools.com/product/F-03099-R.pdf
- Print the pages of the drawing full size or 100% (not fit).
- Check that the printout is full size by measuring the border with a ruler.
- Assemble the pages and place the printed drawing in your toolbox drawer.
- Place the tools over the printed outlines. Visually check that each tool fits within its outline.
Additional Information
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.
