FoamFit Tools section divider

Foam Tool Organizer for
3 Craftsman 72-Tooth Ratchets with 106 Additional Tools

see all organizers for ratchets and drive tools


3 Craftsman 72-Tooth Ratchets with 106 Additional Tools

Fits (3) ratchets, (6) extensions, (2) adapters, (3) swivels, (1) magnetic handle, (1) spinner handle, (44) hex keys, (16) nut driver bits, and (33) screwdriver bits.

Accommodates the ratchets and drive accessories from version 1 of the 298-piece mechanics tool set CMMT12039. This version of the set is made in China.

Drawer Size
22-1/4 X 16-1/4 inches


FoamFit Tools section divider


1/4-drive pear head 72-tooth ratchet (Craftsman 81-747)
3/8-drive pear head 72-tooth ratchet (Craftsman 81-748)
1/2-drive pear head 72-tooth ratchet (Craftsman 81-749)
1/4-drive spinner handle (Craftsman 43372)
3-inch extension bar, 1/4-drive (Craftsman 43539)
6-inch extension bar, 1/4-drive (Craftsman 43531)
3-inch extension bar, 3/8-drive (Craftsman 44264)
6-inch extension bar, 3/8-drive (Craftsman 44261)
3-inch extension bar, 1/2-drive (Craftsman 44133)
6-inch extension bar, 1/2-drive (Craftsman 44131)
1/4-drive universal joint (Craftsman 99216)
3/8-drive universal joint (Craftsman 99291)
1/2-drive universal joint (Craftsman 99294)
3/8-drive to 1/4 socket adapter (Craftsman 99292)
1/2-drive to 3/8 socket adapter (Craftsman 99222)
(1) Magnetic handle bit driver (Craftsman 43373)
(9) inch nut driver bits from 5/32 to 7/16
(7) metric nut driver bits from 5 to 11 mm
(33) screwdriver bits in holders
(8) hex keys 1/16 to 1/4 in holder
(14) hex keys .050 to 1/4 in holder
(8) hex keys 1.5 to 6 mm in holder
(14) hex keys 1.3 to 6 mm in holder

free shipping within the contiguous 48 US states

Free shipping on all orders within the contiguous 48 US states.

Made in the USA!

Foam Organizer for 3 Craftsman Ratchets, 12 socket drive tools, 50 bits with handle, and 44 hex keys.

note: tools are not included

Tool Requirements

This tool organizer was designed to fit tools from version 1 of the 298-pc Craftsman Mechanics Tool Set CMMT12039. The spinner handle and magnetic handle are black. The ratchets have heads assembled with a retaining ring. The hex keys have different holders.

Possible Modifications

Minimum trimmable size:

21-5/8 X 14-1/4 inches

Note: Trimmed organizers are not returnable.

Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.

Colors by special request:

black/yellow, black/green, black/gray

contact customer service to order this organizer in a special color.


Please verify this organizer fits your tools before placing an order.

  1. Download the drawing:
  2. Print the pages of the drawing full size or 100% (not fit).
  3. Check that the printout is full size by measuring the border with a ruler.
  4. Assemble the pages and place the printed drawing in your toolbox drawer.
  5. Place the tools over the printed outlines. Visually check that each tool fits within its outline.

Additional Information

Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.

Black and Red, Blue and Yellow, and Black and Blue Tool Foam
FoamFit Tools section divider

FoamFit Tools Facebook Site FoamFit Tools YouTube Channel FoamFit Tools Pinterest Site