Contact Us | Drawing and Part Number Lookup 920-569-0140
28 Husky Metric Reversible, Nonreversible and Flex-Head Wrenches
Fits (6) metric reversible ratcheting wrenches, (15) metric non-reversible ratcheting wrenches, and (7) metric flex-head ratcheting wrenches.
Accommodates the metric reversible and non-reversible ratcheting wrenches from the Husky 815-pc set H815MTS
31-3/8 X 18-1/2 inches
metric reversible ratcheting combination wrenches:
10 mm (HRRW10MM)
12 mm (HRRW12MM)
13 mm (HRRW13MM)
14 mm (HRRW14MM)
15 mm (HRRW15MM)
metric non-reversible ratcheting wrenches:
8 mm (HRW8MM)
9 mm (HRW9MM)
10 mm (HRW10MM)
11 mm (HRW11MM)
12 mm (HRW12MM)
13 mm (HRW13MM)
14 mm (HRW14MM)
15 mm (HRW15MM)
16 mm (HRW16MM)
17 mm (HRW17MM)
18 mm (HRW18MM)
19 mm (HRW19MM)
20 mm (HRW20MM)
21 mm (HRW21MM)
22 mm (HRW22MM)
metric flex-head ratcheting wrenches:
10 mm (HFRW10MM)
12 mm (HFRW12MM)
13 mm (HFRW13MM)
14 mm (HFRW14MM)
15 mm (HFRW15MM)
This organizer was designed to fit the metric reversible, non-reversible, and flex-head non-reversible ratcheting combination wrenches from the Husky 815-pc set H815MTS.
30-7/16 X 17-1/2 inches
Note: Trimmed organizers are not returnable.
Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.
black/yellow, black/green, black/gray
contact customer service to order this organizer in a special color.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.