Fits (68) 1/4-drive sockets, ratchets, and drive tools, (127) 3/8-drive sockets, ratchets, and drive tools, (58) 1/2-drive sockets, ratchets, and drive tools, and (66) magnetic handle, bits, and acessories.
Accommodates all sockets, ratchets, drive tools, magnetic handle, bits, and accesories from the Husky 432-pc set H432MTS.
Recommended for 3-9/16 min drawer height.
Drawer Size
36-5/8 X 19-1/2 inches
$145.10
larger image
note: tools are not included
Precision CNC-cut to fit 229 Husky Sockets with 5 Ratchets and 85 Additional Tools:
inch sockets:
(11) 1/4-drive 6-point sizes from 5/32 to 9/16
(10) 1/4-drive 12-point sizes from 3/16 to 9/16
(11) 1/4-drive 6-point deep sizes from 5/32 to 9/16
(14) 1/4-drive 6-point sizes from 3.5 to 14
(11) 1/4-drive 6-point deep sizes from 4 to 14
(5) 1/4-drive torx bit socket sizes from T9 to T25
(13) 3/8-drive 6-point sizes from 1/4 to 1
(5) 3/8-drive 8-point sizes from 1/4 to 1/2
(10) 3/8-drive 12-point sizes from 5/16 to 7/8
(10) 3/8-drive 6-point deep sizes from 5/16 to 7/8
(2) 3/8-drive spark plug socket sizes 5/8 and 13/16
(17) 3/8-drive 6-point sizes from 6 to 22
(12) 3/8-drive 12-point sizes from 9 to 19 plus 21
(11) 3/8-drive 6-point deep sizes from 9 to 19
(7) 3/8-drive hex bit socket sizes from 1/8 to 3/8
(7) 3/8-drive hex bit socket sizes from 3 to 8 plus 10
(7) 3/8-drive torx bit socket sizes T20 and T27 to T55
(9) 3/8-drive security (tamper) torx bit socket sizes from T15 to T55
(3) 3/8-drive phillips bit socket sizes #1, #2, #3
(3) 3/8-drive slotted screwdriver bit socket sizes 4, 5, 6mm
(1) 3/8-drive square (pozi) screwdriver bit socket size #2
(12) 1/2-drive 12-point sizes from 3/8 to 1-1/16
(11) 1/2-drive 12-point deep sizes from 3/8 to 1
(14) 1/2-drive 12-point sizes from 9 to 22
(13) 1/2-drive 12-point deep sizes from 9 to 19, plus 21 and 22
metric sockets:
1/4-drive full-polish quick-release ratchet
3/8-drive full-polish quick-release ratchet
1/2-drive full-polish quick-release ratchet
3/8-drive full-polish flex-head ratchet
1/2-drive full-polish flex-head ratchet
1/4-drive X 2 extension bar
1/4-drive X 3 extension bar
1/4-drive X 6 wobble extension bar
3/8-drive X 1-1/2 extension bar
3/8-drive X 3 extension bar
3/8-drive X 6 extension bar
3/8-drive X 6 wobble extension bar
1/2-drive X 3 extension bar
1/2-drive X 5 extension bar
1/2-drive X 10 wobble extension bar
1/4-drive to 3/8 drive adapter
3/8-drive to 1/4-drive adapter
3/8-drive to 1/2-drive adapter
1/2-drive to 3/8-drive adapter
3/8-drive X 10 flex handle (breaker bar)
1/2-drive X 15 flex handle (breaker bar)
1/4-drive universal joint
3/8-drive universal joint
1/2-drive universal joint
bit accessories:
(4) phillips screwdriver bit sizes from #1 to #4
(4) slotted screwdriver bit sizes from 1/8 to 5/16
(5) slotted screwdriver bit sizes from 3 to 6.5mm
(6) hex screwdriver bit sizes from 1/8 to 5/16
(8) hex screwdriver bit sizes from 2.5 to 8 plus 10mm
(4) square screwdriver bit sizes from #0 to #3
(4) pozi screwdriver bit sizes from #1 to #4
(8) torx screwdriver bit sizes from T10 to T45
(8) tamper torx screwdriver bit sizes from T10 to T45
(6) nut driver bit sizes from 1/4 to 1/2
(6) nut driver bit sizes 6 and 8 to 12mm
(10) short arm inch hex keys in holder
(10) short arm metric hex keys in holder
(10) long arm inch hex keys in holder
(10) long arm metric hex keys in holder
additional tools:
magnetic bit driver
1/4 X 5/16 double box-end (ratcheting) wrench
5/16 male hex to 1/4-drive socket adapter
This tool organizer was designed to fit the screwdriver bits, hex bit sockets, and torx bit sockets from the Husky 432-pc set H432MTS.
Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.
36-5/8 X 19-1/2 inches (inside width by inside depth)
Recommended for a drawer with at least 3-9/16 inches of vertical clearance.
It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:
35-7/8 X 19-3/16 inches
Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.
We make these colors in smaller batches, but they are often in stock. Contact customer service to order.
Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.