Contact Us |
Drawing and Part Number Lookup
920-569-0140
Foam Tool Organizer for
33 Wright Combination Wrenches
Overview
33 Wright Combination Wrenches
Fits (15) inch wrenches from 1/4 through 1-1/8 and (18) metric wrenches from 6 to 23 mm.
Fits satin-finish or full-polish Wright wrenches.
Drawer Size
25 X 25 inches
$92.20
Details
- Drawer size: 25 X 25 inches (inside width by inside depth)
- Standard colors: black/red, blue/yellow, black/blue
- Made from closed-cell polyethylene tool foam.
- Precision CNC-cut to fit 33 Wright wrenches:
inch sizes:
1/4 (Wright 1108 or 1208)
5/16 (Wright 1110 or 1210)
3/8 (Wright 1112 or 1212)
7/16 (Wright 1114 or 1214)
1/2 (Wright 1116 or 1216)
9/16 (Wright 1118 or 1218)
5/8 (Wright 1120 or 1220)
11/16 (Wright 1122 or 1222)
3/4 (Wright 1124 or 1224)
13/16 (Wright 1126 or 1226)
7/8 (Wright 1128 or 1228)
15/16 (Wright 1130 or 1230)
1 (Wright 1132 or 1232)
1-1/16 (Wright 1134 or 1234)
1-1/8 (Wright 1136 or 1236)
metric sizes:
6 (Wright 11-06mm or 12-06mm)
7 (Wright 11-07mm or 12-07mm)
8 (Wright 11-08mm or 12-08mm)
9 (Wright 11-09mm or 12-09mm)
10 (Wright 11-10mm or 12-10mm)
11 (Wright 11-11mm or 12-11mm)
12 (Wright 11-12mm or 12-12mm)
13 (Wright 11-13mm or 12-13mm)
14 (Wright 11-14mm or 12-14mm)
15 (Wright 11-15mm or 12-15mm)
16 (Wright 11-16mm or 12-16mm)
17 (Wright 11-17mm or 12-17mm)
18 (Wright 11-18mm or 12-18mm)
19 (Wright 11-19mm or 12-19mm)
20 (Wright 11-20mm or 12-20mm)
21 (Wright 11-21mm or 12-21mm)
22 (Wright 11-22mm or 12-22mm)
23 (Wright 11-23mm or 12-23mm)
Free shipping on all orders within the contiguous 48 US states.
Made in the USA!
note: tools are not included
Tool Requirements
This tool organizer fits the WrightGrip satin-finish or full-polish wrenches.
Possible Modifications
Minimum trimmable size:
24-3/4 X 24-1/2 inches
Note: Trimmed organizers are not returnable.
Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.
Colors by special request:
black/yellow, black/green, black/gray
Contact customer service to order this organizer in a special color.
Drawing
Please verify this organizer fits your tools before placing an order.
- Download the drawing: www.FoamFitTools.com/product/F-04289-R.pdf
- Print the pages of the drawing full size or 100% (not fit).
- Check that the printout is full size by measuring the border with a ruler.
- Assemble the pages and place the printed drawing in your toolbox drawer.
- Place the tools over the printed outlines. Visually check that each tool fits within its outline.
Additional Information
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.
