FoamFit Tools section divider

Foam Tool Organizer for
299 Craftsman Sockets, Fits Version 4

see all organizers for Craftsman sockets

Overview

299 Craftsman Sockets, Fits Version 4

Fits (78) 1/4-drive sockets,
(153) 3/8-drive sockets,
and (68) 1/2-drive sockets.

Accommodates all the sockets from the 299-piece socket set CMMT45310.

Caution: Recommended for a 3-1/2 inch or deeper drawer.

Pockets sized to fit the 4th version of this set.

New!

Drawer Size
36-1/2 X 16-1/4 inches

$109.20



FoamFit Tools section divider

Details

This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 299 Craftsman sockets:

(11) 1/4-drive 6-point sizes from 5/32 to 9/16
(11) 1/4-drive 6-point deep sizes from 5/32 to 9/16
(13) 1/4-drive 6-point sizes from 4 to 14
(13) 1/4-drive 6-point deep sizes from 4 to 14
(5) 1/4-drive hex bit sizes from 3/16 to 3/8
(3) 1/4-drive long hex bit sizes from 5/32 to 7/32
(3) 1/4-drive long hex bit sizes from 4 to 6
(2) 1/4-drive slotted screwdriver bit sizes 7/32 and 1/4
(2) 1/4-drive Phillips screwdriver bit sizes P1 and P2
(5) 1/4-drive Torx sizes from T8 to T25
(7) 1/4-drive security Torx sizes from T7 to T27
(3) 1/4-drive E-Torx sizes from E6 to E8

(13) 3/8-drive 6-point sizes from 1/4 to 1
(10) 3/8-drive 12-point sizes from 5/16 to 7/8
(11) 3/8-drive 6-point deep sizes from 1/4 to 7/8
(12) 3/8-drive 12-point deep sizes from 1/4 to 1, skips 5/16
(3) 3/8-drive spark plug sizes 5/8, 3/4, and 13/16
(17) 3/8-drive 6-point sizes from 6 to 22
(10) 3/8-drive 12-point sizes from 10 to 19
(15) 3/8-drive 6-point deep sizes from 6 to 19 plus 21
(12) 3/8-drive 12-point deep sizes from 10 to 19 plus 21, 22
(7) 3/8-drive hex bit sizes from 1/8 to 3/8
(7) 3/8-drive hex bit sizes from 3 to 8 plus 10
(7) 3/8-drive long hex bit sizes from 1/8 to 3/8
(7) 3/8-drive long hex bit sizes from 3 to 8 plus 10
(3) 3/8-drive slotted screwdriver bit sizes 7/32, 9/32, and 3/8
(4) 3/8-drive Phillips screwdriver bit sizes from P1 to P4
(6) 3/8-drive Torx sizes from T27 to T50
(5) 3/8-drive security Torx sizes from T30 to T55
(4) 3/8-drive E-Torx sizes from E10 to E16

(16) 1/2-drive 12-point sizes from 3/8 to 1-1/4 plus 1-1/2
(11) 1/2-drive 12-point deep sizes from 3/8 to 1-1/8
(20) 1/2-drive 12-point sizes from 10 to 19, 21 to 25, 27, 28, 30, 32, 36
(15) 1/2-drive 12-point deep sizes from 10 to 19, 21 to 24, 27
(2) 1/2-drive hex bit sizes 14 and 17
(2) 1/2-drive Torx bit sizes T55 and T60

This tool organizer was designed to fit every socket in the Craftsman 299-piece socket set CMMT45310. This is the 4th version of the 299-pc set. This version is unique becasue it includes hex bit sockets, torx bit sockets, and screwdriver bit sockets.

free shipping within the contiguous 48 US states

Free shipping on all orders within the contiguous 48 US states.



Made in the USA!

Foam Organizer for Craftsman 299-pc Socket Set

note: tools are not included

Drawer Size

This organizer is designed to fit a toolbox drawer with inner dimensions of:

36-1/2 X 16-1/4 inches (inside width by inside depth)

It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 36-1/4 X 14-3/4 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.

Drawing

Please verify this organizer fits your tools before placing an order.

  1. Download the drawing: www.FoamFitTools.com/product/F-04531-T.pdf
  2. Print the pages of the drawing full size or 100% (not fit).
  3. Check that the printout is full size by measuring the border with a ruler.
  4. Assemble the pages and place the printed drawing in your toolbox drawer.
  5. Place the tools over the printed outlines. Visually check that each tool fits within its outline.

Additional Information

Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.

Black and Red, Blue and Yellow, and Black and Blue Tool Foam
FoamFit Tools section divider

FoamFit Tools Facebook Site FoamFit Tools YouTube Channel FoamFit Tools Pinterest Site