166 Craftsman Metric and Torx Sockets, Fits Version 4
Fits (44) 1/4-drive sockets,
(83) 3/8-drive sockets,
and (39) 1/2-drive sockets.
Accommodates all metric sockets and torx bit sockets from the 299-piece socket set CMMT45310.
Caution: Recommended for a 3-inch or deeper drawer.
Pockets sized to fit the 4th version of this set.
22-1/4 X 16-1/4 inches
This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 166 Craftsman sockets:
(13) 1/4-drive 6-point sizes from 4 to 14
(13) 1/4-drive 6-point deep sizes from 4 to 14
(3) 1/4-drive long hex bit sizes from 4 to 6
(5) 1/4-drive Torx sizes from T8 to T25
(7) 1/4-drive security Torx sizes from T7 to T27
(3) 1/4-drive E-Torx sizes from E6 to E8
(17) 3/8-drive 6-point sizes from 6 to 22
(10) 3/8-drive 12-point sizes from 10 to 19
(15) 3/8-drive 6-point deep sizes from 6 to 19 plus 21
(12) 3/8-drive 12-point deep sizes from 10 to 19 plus 21, 22
(7) 3/8-drive hex bit sizes from 3 to 8 plus 10
(7) 3/8-drive long hex bit sizes from 3 to 8 plus 10
(6) 3/8-drive Torx sizes from T27 to T50
(5) 3/8-drive security Torx sizes from T30 to T55
(4) 3/8-drive E-Torx sizes from E10 to E16
(20) 1/2-drive 12-point sizes from 10 to 19, 21 to 25, 27, 28, 30, 32, 36
(15) 1/2-drive 12-point deep sizes from 10 to 19, 21 to 24, 27
(2) 1/2-drive hex bit sizes 14 and 17
(2) 1/2-drive Torx bit sizes T55 and T60
This tool organizer was designed to fit the metric sockets from the Craftsman 299-piece socket set CMMT45310. This is the 4th version of the 299-pc set. This version is unique becasue it includes hex bit sockets, torx bit sockets, and screwdriver bit sockets.
22-1/4 X 16-1/4 inches (inside width by inside depth)
It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 22 X 16 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.