FoamFit Tools section divider

Foam Tool Organizer for
34 Craftsman Drive Tool set

see all organizers for ratchets and drive tools


34 Craftsman Drive Tool set

Fits (13) extensions, (6) locking extensions, (6) wobble extensions, (3) swivels, and (6) drive adapters.

Accommodates all the drive tools from the 34-pc set CMMT53001.


Drawer Size
22-1/4 X 16-1/4 inches


FoamFit Tools section divider


1/4 X 1-1/2 extension (Craftsman CMMT43538)
1/4 X 3 extension (Craftsman CMMT43539)
1/4 X 6 extension (Craftsman CMMT43531)
1/4 X 14 extension (Craftsman CMMT43532)
1/4 X 3 locking extension (Craftsman CMMT44346)
1/4 X 6 locking extension (Craftsman CMMT44347)
1/4 X 10 locking extension (Craftsman CMMT44348)

3/8 X 1-1/2 extension (Craftsman CMMT43537)
3/8 X 3 extension (Craftsman CMMT44264)
3/8 X 6 extension (Craftsman CMMT44261)
3/8 X 10 extension (Craftsman CMMT44262)
3/8 X 20 extension (Craftsman CMMT44263)
3/8 X 3 locking extension (Craftsman CMMT44356)
3/8 X 6 locking extension (Craftsman CMMT44357)
3/8 X 10 locking extension (Craftsman CMMT44358)
3/8 X 1-1/2 wobble extension (Craftsman CMMT44282)
3/8 X 3 wobble extension (Craftsman CMMT44283)
3/8 X 6 wobble extension (Craftsman CMMT44286)
3/8 X 10 wobble extension (Craftsman CMMT44287)

1/2 X 2 extension (Craftsman CMMT43522)
1/2 X 3 extension (Craftsman CMMT44133)
1/2 X 6 extension (Craftsman CMMT44131)
1/2 X 10 extension (Craftsman CMMT44132)
1/2 X 5 wobble extension (Craftsman CMMT13028)
1/2 X 10 wobble extension (Craftsman CMMT13029)

1/4-drive universal joint (Craftsman CMMT99216)
3/8-drive universal joint (Craftsman CMMT99291)
1/2-drive universal joint (Craftsman CMMT99294)

1/4-drive to 1/4 hex adapter (Craftsman CMMT44955)
1/4-drive to 3/8 socket adapter (Craftsman CMMT13030)
3/8-drive to 1/4 socket adapter (Craftsman CMMT99292)
3/8-drive to 1/2 socket adapter (Craftsman CMMT99293)
1/2-drive to 3/8 socket adapter (Craftsman CMMT99222)
1/2-drive to 3/4 socket adapter (Craftsman CMMT99223)

free shipping within the contiguous 48 US states

Free shipping on all orders within the contiguous 48 US states.

Made in the USA!

Foam Organizer for 34 Craftsman Extensions and Drive Tools

note: tools are not included

Tool Requirements

This tool organizer was designed to fit the 34-piece Craftsman drive tool set CMMT53001. This drive tool set was new in 2022 and older tools may not fit.

Possible Modifications

Minimum trimmable size:

21-3/4 X 12-7/16 inches

Note: Trimmed organizers are not returnable.

Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.

Colors by special request:

black/yellow, black/green, black/gray

Contact customer service to order this organizer in a special color.


Please verify this organizer fits your tools before placing an order.

  1. Download the drawing:
  2. Print the pages of the drawing full size or 100% (not fit).
  3. Check that the printout is full size by measuring the border with a ruler.
  4. Assemble the pages and place the printed drawing in your toolbox drawer.
  5. Place the tools over the printed outlines. Visually check that each tool fits within its outline.

Additional Information

Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.

Black and Red, Blue and Yellow, and Black and Blue Tool Foam
FoamFit Tools section divider

FoamFit Tools Facebook Site FoamFit Tools YouTube Channel FoamFit Tools Pinterest Site