Contact Us |
Drawing and Part Number Lookup
920-569-0140
Foam Tool Organizer for
37 Husky Screwdrivers, Hard Handle Style, Version 2
Overview
37 Husky Screwdrivers, Hard Handle Style, Version 2
Fits (17) slotted screwdrivers, (8) Phillips screwdrivers, (6) Torx screwdrivers, (2) square screwdrivers, (2) offset screwdrivers, and (2) pocket screwdrivers.
Accommodates the screwdrivers from the 1025-pc Husky set H1025MTS or the 37-pc Husky set HSCREWD37BAS.
Updated to fit both the older and newer handle designs.
Drawer Size
31-1/2 X 17 inches
$79.00
Details
- Drawer size: 31-1/2 X 17 inches (inside width by inside depth)
- Standard colors: black/red, blue/yellow, black/blue
- Made from closed-cell polyethylene tool foam.
- Precision CNC-cut to fit 37 Husky screwdrivers:
Phillips:
P3 X 6 (H3X6PHSD)
P2 X 8 (H2X8PHSD)
P2 X 6 (H2X6PHSD)
P2 X 4 (H2X4PHSD)
P2 X 1-1/2 (H2X121SPHSD)
P1 X 3 (H1X3PHSD)
P1 X 1-1/2 (H1X112SPHSD)
P0 X 2-1/2 (H0X212PSD)
Slotted:
3/8 X 16 (H38X16FHSD)
3/8 X 12 (H38X12FHSD)
3/8 X 8 (H38X8FHSD)
5/16 X 8 (H516X8FHSD)
5/16 X 6 (H516X6FHSD)
1/4 X 6 (H14X6FHSD)
1/4 X 4 (H14X4FHSD)
3/16 X 9 (H316X9FHSD)
3/16 X 8 (H316X8CFHSD)
3/16 X 6 (H316X6FHSD)
3/16 X 4 (H316X4FHSD)
3/16 X 4 (H316X4CFHSD)
1/8 X 6 (H18X6FHSD)
1/8 X 4 (H18X4FHSD)
1/8 X 2 (H18X2FHSD)
1/4 X 1-1/2 (H114X112SFHSD)
3/16 X 1-1/2 (H316X112SFHSD)
Torx:
T10 X 3
T15 X 3
T20 X 3
T25 X 4
T27 X 4
T30 X 4
Square:
S2 x 4 (H2X4SQSD)
S1 x 4 (H1X4SQSD)
Other:
2-piece offset (H2PCOSSDS)
2-piece micro (H2PCMICROSDS)
Free shipping on all orders within the contiguous 48 US states.
Made in the USA!
note: tools are not included
Tool Requirements
This tool organizer was designed to fit the screwdrivers from the 1025-pc Husky set H1025MTS or H1025MTSPO. It also fits the Husky 37-pc screwdriver set HSCREWD37BAS. Fits both the older handles with a rounded end nearest the blade and the newer 6-lobe shape.
Possible Modifications
Minimum trimmable size:
31-1/4 X 16-1/2 inches
Note: Trimmed organizers are not returnable.
Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.
Colors by special request:
black/yellow, black/green, black/gray
Contact customer service to order this organizer in a special color.
Drawing
Please verify this organizer fits your tools before placing an order.
- Download the drawing: www.FoamFitTools.com/product/F-05080-R.pdf
- Print the pages of the drawing full size or 100% (not fit).
- Check that the printout is full size by measuring the border with a ruler.
- Assemble the pages and place the printed drawing in your toolbox drawer.
- Place the tools over the printed outlines. Visually check that each tool fits within its outline.
Additional Information
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.
