Contact Us |
Drawing and Part Number Lookup
920-569-0140
Foam Tool Organizer for
51 Husky Metric Ratcheting Wrenches
Overview
51 Husky Metric Ratcheting Wrenches
Fits (18) non-reversible ratcheting wrenches, (13) reversible ratcheting wrenches, (13) flex-head ratcheting wrenches, and (7) stubby ratcheting wrenches.
Accommodates the metric ratcheting wrenches from the Husky 1025-pc set H1025MTS.
Caution: Recommended for minimum of 3 inches of drawer height.
Drawer Size
31-1/2 X 17 inches
$105.10
Details
- Drawer size: 31-1/2 X 17 inches (inside width by inside depth)
- Standard colors: black/red, blue/yellow, black/blue
- Made from closed-cell polyethylene tool foam.
- Precision CNC-cut to fit 51 Husky wrenches:
non-reversible ratcheting:
8 (HRW8MM)
9 (HRW9MM)
10 (HRW10MM)
11 (HRW11MM)
12 (HRW12MM)
13 (HRW13MM)
14 (HRW14MM)
15 (HRW15MM)
16 (HRW16MM)
17 (HRW17MM)
18 (HRW18MM)
19 (HRW19MM)
20 (HRW20MM)
21 (HRW21MM)
22 (HRW22MM)
24 (HRW24MM)
27 (HRW27MM)
30 (HRW30MM)
flex-head ratcheting:
8
9
10 (HFRW10MM)
11
12 (HFRW12MM)
13 (HFRW13MM)
14 (HFRW14MM)
15 (HFRW15MM)
16
17
18
19
21
reversible ratcheting:
8 mm
9 mm
10 mm (HRRW10MM)
11 mm
12 mm (HRRW12MM)
13 mm (HRRW13MM)
14 mm (HRRW14MM)
15 mm (HRRW15MM)
16 mm
17 mm
18 mm
19 mm
21 mm
stubby ratcheting:
10 mm (HSTRW10MM)
11 mm (HSTRW11MM)
12 mm (HSTRW12MM)
13 mm (HSTRW13MM)
14 mm (HSTRW14MM)
15 mm (HSTRW15MM)
18 mm (HSTRW18MM)
Free shipping on all orders within the contiguous 48 US states.
Made in the USA!
note: tools are not included
Tool Requirements
This organizer was designed to fit the metric ratcheting wrenches from the Husky 1025-pc set H1025MTS or H1025MTSPO.
Possible Modifications
Minimum trimmable size:
30-3/4 X 16-1/2 inches
Note: Trimmed organizers are not returnable.
Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.
Colors by special request:
black/yellow, black/green, black/gray
Contact customer service to order this organizer in a special color.
Drawing
Please verify this organizer fits your tools before placing an order.
- Download the drawing: www.FoamFitTools.com/product/F-05084-T.pdf
- Print the pages of the drawing full size or 100% (not fit).
- Check that the printout is full size by measuring the border with a ruler.
- Assemble the pages and place the printed drawing in your toolbox drawer.
- Place the tools over the printed outlines. Visually check that each tool fits within its outline.
Additional Information
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.
