Foam Tool Organizer for
196 Tekton Sockets with 3 Ratchets and 13 Drive Tools

Overview

196 Tekton Sockets with 3 Ratchets and 13 Drive Tools

Fits the Tekton 212-pc mechanics set SKT95304.

Fits (84) inch sockets, (112) metric sockets, (3) ratchets, and (13) additional drive tools.

Fits all the tools from the 56-pc 1/4-drive set SKT05303, 73-pc 3/8-drive set SKT15311, and 83-pc 1/2-drive set SKT25302.

Recommended for 3-1/2 min drawer height.

Tool Notes

This tool organizer was designed to fit all the tools from the 212-pc Tekton set SKT95304. The 212-pc set is three sets combined, so the Tekton 56-pc set SKT05303, 73-pc set SKT15311, and 83-pc set SKT25302 would also fit. This organizer has been updated to fit the newer black spinner handle with red ends. It also includes pockets for two 1/4-drive 15 mm sockets which were recently added to the 1/4-drive set.

Drawing

Drawing F-05142-T.pdf

Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.

Part of Collection

Organizers for Tekton 212-pc Set and Related

Drawer Size

38 X 18 inches (inside width by inside depth)

Drawer Height

Recommended for a drawer with at least 3-1/2 inches of vertical clearance.

Minimum Trimmable Size

It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:

36 X 16-1/4 inches

Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.

Features and Benefits

• See what's missing at a glance.
• Anyone can return tools to the right spot.
• Closed-cell PE tool foam is durable and has great chemical resistance.

Standard Colors

Special Colors

We make these colors in smaller batches, but they are often in stock. Contact customer service to order.

Additional Information

Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.