Fits all the drive tools from the 34-pc set CMMT53001. Also fits 3 breaker bars from the 24-pc set CMMT86901.
Fits (13) extensions, (6) locking extensions, (6) wobble extensions, (3) swivels, (6) drive adapters, and (3) breaker bars.
22-1/4 X 16-1/4 inches
note: tools are not included
Precision CNC-cut to fit 37 Craftsman drive tools:
1/4 X 1-1/2 extension (Craftsman CMMT43538)
1/4 X 3 extension (Craftsman CMMT43539)
1/4 X 6 extension (Craftsman CMMT43531)
1/4 X 14 extension (Craftsman CMMT43532)
1/4 X 3 locking extension (Craftsman CMMT44346)
1/4 X 6 locking extension (Craftsman CMMT44347)
1/4 X 10 locking extension (Craftsman CMMT44348)
3/8 X 1-1/2 extension (Craftsman CMMT43537)
3/8 X 3 extension (Craftsman CMMT44264)
3/8 X 6 extension (Craftsman CMMT44261)
3/8 X 10 extension (Craftsman CMMT44262)
3/8 X 20 extension (Craftsman CMMT44263)
3/8 X 3 locking extension (Craftsman CMMT44356)
3/8 X 6 locking extension (Craftsman CMMT44357)
3/8 X 10 locking extension (Craftsman CMMT44358)
3/8 X 1-1/2 wobble extension (Craftsman CMMT44282)
3/8 X 3 wobble extension (Craftsman CMMT44283)
3/8 X 6 wobble extension (Craftsman CMMT44286)
3/8 X 10 wobble extension (Craftsman CMMT44287)
1/2 X 2 extension (Craftsman CMMT43522)
1/2 X 3 extension (Craftsman CMMT44133)
1/2 X 6 extension (Craftsman CMMT44131)
1/2 X 10 extension (Craftsman CMMT44132)
1/2 X 5 wobble extension (Craftsman CMMT13028)
1/2 X 10 wobble extension (Craftsman CMMT13029)
1/4-drive universal joint (Craftsman CMMT99216)
3/8-drive universal joint (Craftsman CMMT99291)
1/2-drive universal joint (Craftsman CMMT99294)
1/4-drive to 1/4 hex adapter (Craftsman CMMT44955)
1/4-drive to 3/8 socket adapter (Craftsman CMMT13030)
3/8-drive to 1/4 socket adapter (Craftsman CMMT99292)
3/8-drive to 1/2 socket adapter (Craftsman CMMT99293)
1/2-drive to 3/8 socket adapter (Craftsman CMMT99222)
1/2-drive to 3/4 socket adapter (Craftsman CMMT99223)
3/8 X 10 breaker bar (Craftsman CMMT44363)
1/2 X 15 breaker bar (Craftsman CMMT44201)
1/2 X 18 breaker bar (Craftsman CMMT44202)
This tool organizer was designed to fit the 34-piece Craftsman drive tool set CMMT53001. It also has pockets for the 3 Craftsman breaker bars that were included in the 24-pc set CMMT86901. These sets were new in 2022 and older tools may not fit.
Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.
22-1/4 X 16-1/4 inches (inside width by inside depth)
Works in most drawers, needing no more than 2 inches of vertical clearance.
It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:
21-7/16 X 16 inches
Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.
Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.
For orders within the contiguous 48 US states.
Made in the USA!