Foam Tool Organizer for
30 Tekton Crow Foot Wrenches


30 Tekton Crow Foot Wrenches

Fits the crow foot wrenches from set WCF93302.

Fits (13) inch sizes from 5/16 to 1. Fits (17) metric sizes from 8 to 24 mm.

Only fits the newer made in USA version.

Recommended for 2-7/16 min drawer height.


Drawer Size
11-7/8 X 17-3/4 inches


Foam Organizer for 30 Tekton Crow Foot Wrenches

larger image

Foam Organizer for 30 Tekton Crow Foot Wrenches

larger image

note: tools are not included

Tool List

Precision CNC-cut to fit 30 Tekton crow foot wrenches:

5/16 (Tekton WCF13108)
11/32 (Tekton WCF13109)
3/8 (Tekton WCF13110)
7/16 (Tekton WCF13111)
1/2 (Tekton WCF13113)
9/16 (Tekton WCF13114)
5/8 (Tekton WCF13116)
11/16 (Tekton WCF13117)
3/4 (Tekton WCF13119)
13/16 (Tekton WCF13121)
7/8 (Tekton WCF13122)
15/16 (Tekton WCF13124)
1 (Tekton WCF13125)

8 mm (Tekton WCF14108)
9 mm (Tekton WCF14109)
10 mm (Tekton WCF14110)
11 mm (Tekton WCF14111)
12 mm (Tekton WCF14112)
13 mm (Tekton WCF14113)
14 mm (Tekton WCF14114)
15 mm (Tekton WCF14115)
16 mm (Tekton WCF14116)
17 mm (Tekton WCF14117)
18 mm (Tekton WCF14118)
19 mm (Tekton WCF14119)
20 mm (Tekton WCF14120)
21 mm (Tekton WCF14121)
22 mm (Tekton WCF14122)
23 mm (Tekton WCF14123)
24 mm (Tekton WCF14124)

Tool Notes

This tool organizer was designed to fit the Tekton 30-pc crow foot wrench set. Model numbers for the set include WCF93302, WCF94302, or WCF95301. Only fits newer tools with USA marked on them.


Drawing F-05404-T.pdf

Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.

Drawer Size

11-7/8 X 17-3/4 inches (inside width by inside depth)

Drawer Height

Recommended for a drawer with at least 2-7/16 inches of vertical clearance.

Minimum Trimmable Size

It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:

9-1/2 X 14-1/4 inches

Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.

Features and Benefits

Standard Colors

black over red color combination blue over yellow color combination black over blue color combination

Special Colors

We make these colors in smaller batches, but they are often in stock. Contact customer service to order.

black over yellow color combination black over green color combination black over gray color combination

Additional Information

Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.

Free Shipping!

For orders within the contiguous 48 US states.

US flag

Made in the USA!