Fits the sockets from version 1 of the aviation technician bundle.
Fits (70) inch sockets, (66) metric sockets, (3) ratchets, (16) additional drive tools, and (13) crow foot wrenches.
For the version that included (11) 1/2-drive sockets and torque wrench models 24320 and 24330.
Recommended for 3-1/2 min drawer height.
Drawer Size
37-1/8 X 19-3/8 inches
$146.10
larger image
note: tools are not included
Precision CNC-cut to fit 168 Tekton tools:
from 1/4-drive set SKT05304:
(11) 1/4-drive deep 12-point sizes from 5/32 to 9/16
(11) 1/4-drive 12-point sizes from 5/32 to 9/16
(14) 1/4-drive deep 12-point sizes from 4 to 15 mm
(14) 1/4-drive 12-point sizes from 4 to 15 mm
1/4-drive 90-tooth quick-release ratchet (Tekton SRH11006)
1/4-drive 6-inch spinner handle (Tekton SHH03125)
1/4 X 3 extension (Tekton SHA01103)
1/4 X 6 extension (Tekton SHA01106)
1/4-drive universal joint (Tekton SHA02100)
1/4-drive magnetic hex bit holder (Tekton SHA05402)
from the 3/8-drive set SKT15312:
(15) 3/8-drive deep 12-point sizes from 1/4 to 1 inch
(15) 3/8-drive 12-point sizes from 1/4 to 1 inch
(19) 3/8-drive deep 12-point sizes from 6 to 24
(19) 3/8-drive 12-point sizes from 6 to 24
3/8-drive 90-tooth quick-release ratchet (Tekton SRH11108)
3/8 X 18 breaker bar (Tekton SBH00118)
3/8 X 3 extension (Tekton SHA11103)
3/8 X 6 extension (Tekton SHA11106)
3/8-drive universal joint (Tekton SHA12101)
aditional tools:
(7) 1/4-drive universal joint sockets from 1/4 to 9/16 (Tekton SHD90109)
(13) 3/8-drive crow foot wrenches from 5/16 to 1 (Tekton WCF95101)
(11) 1/2-drive deep 12-point sizes from 3/8 to 1 (Tekton SHD92107)
(4) drive adapters (Tekton SHA99017)
1/2 X 24 breaker bar (Tekton SBH00224)
1/2 X 10-1/2 quick release ratchet (Tekton SRH11210)
1/4-drive torque wrench, 20 to 200 in-lbs (Tekton 24320)
3/8-drive torque wrench, 10 to 80 ft-lbs (Tekton 24330)
This tool organizer was designed to fit the sockets and drive tools from verison 1 of the Tekton Aviation Technician Bundle BDL99914. It has been sized for a US General 42-inch Series 3 roll cabinet drawer, but other sizes are available by request. The newer version of the aviation bundle adds another 1/2-drive set and changes both torque wrenches, but the original bundle can still be sourced from Tekton (last verified Feb 2024). We always recommend checking on tool availability before ordering.
Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.
37-1/8 X 19-3/8 inches (inside width by inside depth)
Recommended for a drawer with at least 3-1/2 inches of vertical clearance.
It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:
34-5/8 X 15-1/2 inches
Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.
We make these colors in smaller batches, but they are often in stock. Contact customer service to order.
Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.