Fits the sockets and drive tools from the 428-pc master technician set.
Fits (105) inch sockets, (101) metric sockets, (45) bit sockets, (3) ratchets, and (20) additional drive tools.
Recommended for 3-1/2 min drawer height.
Drawer Size
36-5/8 X 19-1/2 inches
$145.10
larger image
note: tools are not included
Precision CNC-cut to fit 274 Quinn tools:
(11) 1/4-drive 6-point sizes from 5/32 to 9/16
(11) 1/4-drive 12-point sizes from 3/16 to 9/16
(10) 1/4-drive 6-point deep sizes from 3/16 to 9/16
(14) 1/4-drive 6-point sizes from 4 to 14
(11) 1/4-drive 6-point deep sizes from 4 to 14
(8) 1/4-drive hex bit socket sizes from 1/16 to 7/32
(6) 1/4-drive hex bit socket sizes from 2.5 to 7
(6) 1/4-drive torx bit socket sizes from T10 to T30
(7) 1/4-drive slotted bit socket sizes from 1/8 to 3/8
(11) 3/8-drive 6-point sizes from 1/4 to 7/8
(3) 3/8-drive 8-point sizes from 1/4 to 3/8
(10) 3/8-drive 12-point sizes from 5/16 to 7/8
(9) 3/8-drive 6-point deep sizes from 3/8 to 7/8
(2) 3/8-drive spark plug socket sizes 5/8 and 13/16
(17) 3/8-drive 6-point sizes from 6 to 22
(12) 3/8-drive 12-point sizes from 9 to 19 plus 21
(10) 3/8-drive 6-point deep sizes from 10 to 19
(3) 3/8-drive hex bit socket sizes from 1/4 to 5/16
(3) 3/8-drive hex bit socket sizes 7, 8, 10
(3) 3/8-drive torx bit socket sizes T40 to T50
(3) 3/8-drive phillips bit socket sizes #1, #2, #3
(15) 1/2-drive 6-point sizes from 3/8 to 1-1/4
(12) 1/2-drive 12-point sizes from 3/8 to 1-1/16
(9) 1/2-drive 6-point deep sizes from 1/2 to 1
(2) 1/2-drive spark plug socket sizes 5/8 and 13/16
(16) 1/2-drive 6-point sizes from 10 to 32
(11) 1/2-drive 12-point sizes from 9 to 19
(10) 1/2-drive 6-point deep sizes from 13 to 19, plus 21, 22, 24
(2) 1/2-drive hex bit socket sizes 7/16, 9/16
(2) 1/2-drive hex bit socket sizes 12, 14
(2) 1/2-drive torx bit socket sizes T60, T70
1/4-drive 72-tooth ratchet
3/8-drive 72-tooth ratchet
1/2-drive 72-tooth ratchet
1/4-drive X 3 extension
1/4-drive X 6 wobble extension
3/8-drive X 1-1/2 extension
3/8-drive X 3 extension
3/8-drive X 6 extension
3/8-drive X 6 wobble extension
3/8-drive X 10 extension
1/2-drive X 3 extension
1/2-drive X 5 extension
1/2-drive X 10 wobble extension
1/4-drive to 3/8 drive adapter
3/8-drive to 1/4-drive adapter
3/8-drive to 1/2-drive adapter
1/2-drive to 3/8-drive adapter
1/2-drive T-bar adapter
3/8-drive X 8 flex handle (breaker bar)
1/2-drive X 15 flex handle (breaker bar)
1/4-drive universal joint
3/8-drive universal joint
1/2-drive universal joint
This tool organizer was designed to fit the sockets, ratchets, and drive tools from the Quinn 428-pc set 58154. The foam is sized to fit the 44-inch Series 2 US General toolbox.
Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.
36-5/8 X 19-1/2 inches (inside width by inside depth)
Recommended for a drawer with at least 3-1/2 inches of vertical clearance.
It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:
36-1/8 X 18-7/16 inches
Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.
We make these colors in smaller batches, but they are often in stock. Contact customer service to order.
Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.