Drawing and Part Number Lookup | Contact Us 920‑569‑0140

Tool Foam Blanks Tool Organizers Kits With Tools

Foam Tool Organizer for
251 Quinn Sockets with 3 Ratchets and 20 Drive Accessories

Overview

251 Quinn Sockets with 3 Ratchets and 20 Drive Accessories

Fits the sockets and drive tools from the 428-pc master technician set.

Fits (105) inch sockets, (101) metric sockets, (45) bit sockets, (3) ratchets, and (20) additional drive tools.

Recommended for 3-1/2 min drawer height.

Drawer Size
37-1/8 X 19-3/8 inches

$141.10

Foam Organizer for 251 Quinn Sockets with 3 Ratchets and 20 Drive Accessories

larger image

note: tools are not included

Tool List

Precision CNC-cut to fit 274 Quinn tools:

(11) 1/4-drive 6-point sizes from 5/32 to 9/16
(11) 1/4-drive 12-point sizes from 3/16 to 9/16
(10) 1/4-drive 6-point deep sizes from 3/16 to 9/16
(14) 1/4-drive 6-point sizes from 4 to 14
(11) 1/4-drive 6-point deep sizes from 4 to 14
(8) 1/4-drive hex bit socket sizes from 1/16 to 7/32
(6) 1/4-drive hex bit socket sizes from 2.5 to 7
(6) 1/4-drive torx bit socket sizes from T10 to T30
(7) 1/4-drive slotted bit socket sizes from 1/8 to 3/8

(11) 3/8-drive 6-point sizes from 1/4 to 7/8
(3) 3/8-drive 8-point sizes from 1/4 to 3/8
(10) 3/8-drive 12-point sizes from 5/16 to 7/8
(9) 3/8-drive 6-point deep sizes from 3/8 to 7/8
(2) 3/8-drive spark plug socket sizes 5/8 and 13/16
(17) 3/8-drive 6-point sizes from 6 to 22
(12) 3/8-drive 12-point sizes from 9 to 19 plus 21
(10) 3/8-drive 6-point deep sizes from 10 to 19
(3) 3/8-drive hex bit socket sizes from 1/4 to 5/16
(3) 3/8-drive hex bit socket sizes 7, 8, 10
(3) 3/8-drive torx bit socket sizes T40 to T50
(3) 3/8-drive phillips bit socket sizes #1, #2, #3

(15) 1/2-drive 6-point sizes from 3/8 to 1-1/4
(12) 1/2-drive 12-point sizes from 3/8 to 1-1/16
(9) 1/2-drive 6-point deep sizes from 1/2 to 1
(2) 1/2-drive spark plug socket sizes 5/8 and 13/16
(16) 1/2-drive 6-point sizes from 10 to 32
(11) 1/2-drive 12-point sizes from 9 to 19
(10) 1/2-drive 6-point deep sizes from 13 to 19, plus 21, 22, 24
(2) 1/2-drive hex bit socket sizes 7/16, 9/16
(2) 1/2-drive hex bit socket sizes 12, 14
(2) 1/2-drive torx bit socket sizes T60, T70

1/4-drive 72-tooth ratchet
3/8-drive 72-tooth ratchet
1/2-drive 72-tooth ratchet
1/4-drive X 3 extension
1/4-drive X 6 wobble extension
3/8-drive X 1-1/2 extension
3/8-drive X 3 extension
3/8-drive X 6 extension
3/8-drive X 6 wobble extension
3/8-drive X 10 extension
1/2-drive X 3 extension
1/2-drive X 5 extension
1/2-drive X 10 wobble extension
1/4-drive to 3/8 drive adapter
3/8-drive to 1/4-drive adapter
3/8-drive to 1/2-drive adapter
1/2-drive to 3/8-drive adapter
1/2-drive T-bar adapter
3/8-drive X 8 flex handle (breaker bar)
1/2-drive X 15 flex handle (breaker bar)
1/4-drive universal joint
3/8-drive universal joint
1/2-drive universal joint

Tool Notes

This tool organizer was designed to fit the sockets, ratchets, and drive tools from the Quinn 428-pc set 58154. The foam size is adjusted slightly to fit the 42-inch Series 3 US General toolbox.

Drawing

Drawing F-05782-T.pdf

Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.

Part of Collection

Organizers for Quinn 428-ps Set, Various Toolboxes

Drawer Size

37-1/8 X 19-3/8 inches (inside width by inside depth)

Drawer Height

Recommended for a drawer with at least 3-1/2 inches of vertical clearance.

Minimum Trimmable Size

It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:

36-1/8 X 18-7/16 inches

Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.

Features and Benefits

See what's missing at a glance.
Anyone can return tools to the right spot.
Closed-cell PE tool foam is durable and has great chemical resistance.

Standard Colors

Special Colors

We make these colors in smaller batches, but they are often in stock. Contact customer service to order.

Additional Information

Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.

Free Shipping!

For orders within the contiguous 48 US states.

Made in the USA!

Foam Tool Organizer for251 Quinn Sockets with 3 Ratchets and 20 Drive Accessories