Fits the 8-pc screwdriver set, 4-pc mini screwdriver set, 4-pc mini torx screwdriver set, 4-pc mini pick and hook set, 13-pc color-coded inch hex key set, and 13-pc color-coded metric hex key set.
Fits (6) slotted screwdrivers, (6) Phillips screwdrivers, (4) Torx screwdrivers, (4) mini picks, and (26) hex keys.
Drawer Size
22-1/4 X 19-3/8 inches
$65.90
larger image
note: tools are not included
Precision CNC-cut to fit 46 Icon tools:
Set ACSD-8 (70309)
1/4 X 1-1/2
3/16 X 3
1/4 X 4
5/16 X 6
#2 X 1-1/2
#1 X 3
#2 X 4
#3 X 6
Mini Set MSD-4 (59468)
1/8 X 3
3/16 X 3
#0 X 3
#1 X 3
Mini Torx Set MTSD-4 (59469)
T8 X 3
T10 X 3
T15 X 3
T20 X 3
Precision Pick and Hook Set KMS-400 (57786)
straight awl
45-degree pick
90-degree pick
hook
Other Sets:
(13) color-coded, ball-end hex key sizes 0.050 to 3/8 (Icon MCBHLS-13)
(13) color-coded, ball-end hex key sizes 1.5 to 10 mm (Icon MCBHLM-9)
This tool organizer was designed to fit the 8-pc Icon professional mechanics screwdriver set 70309. We also added 3 mini screwdrivers sets (59468, 59469, 57786) and two hex key sets (57926, 57927). The foam is sized for a medium-width drawer from US General Series 3 boxes like the 27 and 42-inch, but it will also fit okay in some Series 2 boxes.
Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.
22-1/4 X 19-3/8 inches (inside width by inside depth)
Works in most drawers, needing no more than 2 inches of vertical clearance.
It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:
21-3/4 X 17 inches
Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.
We make these colors in smaller batches, but they are often in stock. Contact customer service to order.
Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.