Fits the 8-pc screwdriver set, 4-pc mini screwdriver set, 4-pc mini torx screwdriver set, and 4-pc mini pick and hook set.
Fits (6) slotted screwdrivers, (6) Phillips screwdrivers, (4) Torx screwdrivers, and (4) mini picks.
Drawer Size
13-3/16 X 22-1/4 inches
$48.90
larger image
note: tools are not included
Precision CNC-cut to fit 20 Icon screwdrivers:
Set ACSD-8 (70309)
1/4 X 1-1/2
3/16 X 3
1/4 X 4
5/16 X 6
#2 X 1-1/2
#1 X 3
#2 X 4
#3 X 6
Mini Set MSD-4 (59468)
1/8 X 3
3/16 X 3
#0 X 3
#1 X 3
Mini Torx Set MTSD-4 (59469)
T8 X 3
T10 X 3
T15 X 3
T20 X 3
Precision Pick and Hook Set KMS-400 (57786)
straight awl
45-degree pick
90-degree pick
hook
This tool organizer was designed to fit the 8-pc Icon professional mechanics screwdriver set 70309. We also added 3 mini screwdrivers sets (59468, 59469, 57786). The foam is sized for the narrow drawer from an Icon 56-inch or 73-inch toolbox.
Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.
13-3/16 X 22-1/4 inches (inside width by inside depth)
Works in most drawers, needing no more than 2 inches of vertical clearance.
It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:
12-11/16 X 20-1/8 inches
Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.
We make these colors in smaller batches, but they are often in stock. Contact customer service to order.
Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.