Foam Tool Organizer for
10 Craftsman Inch Combination Wrenches with 5 Midget Wrenches

Overview

10 Craftsman Inch Combination Wrenches with 5 Midget Wrenches

Fits inch sizes from the 32-pc set CMMT12080.

Fits (10) inch combination wrenches from 1/2 to 1-1/8 and (5) midget wrenches from 7/32 to 7/16.

Only fits the newer version made in India.

Only fits satin-finish, raised-panel style wrenches.

Tool Notes

The Craftsman raised-panel wrenches have a raised rectangular area in the middle where "Craftsman" and the size are marked. These wrenches have changed in length and width over the years as different factories have produced them for Craftsman. This organizer fits the inch sizes from the 32-pc set which is model CMMT12080. This particular set is made in India and is sold at Lowes, Ace Hardware, and other stores. The wrenches currently sold by Sears will not fit. Full polish wrenches, Gunmetal chrome wrenches, and Overdrive wrenches will not fit. If you have older wrenches, review our drawing (see link below) to see how your wrenches compare in length and width.

Drawing

Drawing F-06393-R.pdf

Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.

Drawer Size

22-1/4 X 14-1/2 inches (inside width by inside depth)

Drawer Height

Works in most drawers, needing no more than 2 inches of vertical clearance.

Minimum Trimmable Size

It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:

21-5/16 X 14-1/8 inches

Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.

Features and Benefits

• See what's missing at a glance.
• Anyone can return tools to the right spot.
• Closed-cell PE tool foam is durable and has great chemical resistance.

Standard Colors

Special Colors

We make these colors in smaller batches, but they are often in stock. Contact customer service to order.

Additional Information

Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.