Foam Tool Organizer for
251 Tekton Sockets with 5 Ratchets and 18 Drive Tools

Overview

251 Tekton Sockets with 5 Ratchets and 18 Drive Tools

Fits the 212-pc set plus 62 additional tools.

Fits (104) inch sockets, (135) metric sockets, (12) torx bit sockets, (5) ratchets, and (18) additional drive tools.

Additions include (21) 12-point sockets, (3) spark plug sockets, (31) hex and torx bit sockets, stubby 3/8 ratchet, flex-head 3/8 ratchet, 1/2 X 6 extension, and (4) drive adapters.

Recommended for 3-1/2 min drawer height.

Tool Notes

This tool organizer was designed to fit the Tekton 212-pc set plus 62 additional tools. The 212-pc set includes the 56-pc (1/4-drive) set SKT05303, 73-pc (3/8-drive) set SKT15311, and 83-pc (1/2-drive) set SKT25302. Those are all 6-point sockets, so we added some 12-point sockets, hex bit sockets, torx bit sockets, and spark plug sockets. We also added two ratchets and an extra extension. The 1/4-drive spinner handle changed recently and this foam fits the new version with the black metal handle. The foam is sized the foam to fit the top drawer of the US General 42-inch roll cab. The additional pockets fit the following Tekton sets: SHD91103 (12-pt, inch), SHD91104 (12-pt, mm), SHD15016 (5/8 spark plug), SHD15019 (3/4 spark plug), SHD15021 (3/16 spark plug), SHB91106 (hex, inch), SHB91107 (hex, mm), SHB91103 (torx), SRH33112 (3/8 flex bent ratchet), SRH11104 (3/8 stubby ratchet), SHA21106 (1/2 X 6 extension), and SHA99017 (4-pc adapter).

Drawing

Drawing F-06551-T.pdf

Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.

Drawer Size

37-1/8 X 19-3/8 inches (inside width by inside depth)

Drawer Height

Recommended for a drawer with at least 3-1/2 inches of vertical clearance.

Minimum Trimmable Size

It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:

36-1/2 X 19 inches

Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.

Features and Benefits

• See what's missing at a glance.
• Anyone can return tools to the right spot.
• Closed-cell PE tool foam is durable and has great chemical resistance.

Standard Colors

Special Colors

We make these colors in smaller batches, but they are often in stock. Contact customer service to order.

Additional Information

Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.