Foam Tool Organizer for
34 Tekton Combination Wrenches, Version 2

Overview

34 Tekton Combination Wrenches, Version 2

Fits the 34-pc set.

Fits (15) wrenches from 1/4 to 1 inch, (19) wrenches from 6 to 24 mm.

Only fits newer version with larger 11/32 and 3/8 wrenches.

Tool Notes

This tool organizer was designed to fit the Tekton 34-pc combination wrench set WCB90302. The foam was sized to fit the second full-width drawer in the US General 42-inch Series 3 roll cab. Older versions of this toolbox only had one wide drawer, but they've added a second drawer that is fairly thin which works great for wrenches. Two wrenches were changed several years ago. The pockets on this layout are sized to fit the current, longer version of the 11/32 and 3/8 sizes.

Drawing

Drawing F-06552-R.pdf

Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.

Drawer Size

37-1/8 X 19-3/8 inches (inside width by inside depth)

Drawer Height

Works in most drawers, needing no more than 2 inches of vertical clearance.

Minimum Trimmable Size

It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:

36-13/16 X 18-5/16 inches

Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.

Features and Benefits

• See what's missing at a glance.
• Anyone can return tools to the right spot.
• Closed-cell PE tool foam is durable and has great chemical resistance.

Standard Colors

Special Colors

We make these colors in smaller batches, but they are often in stock. Contact customer service to order.

Additional Information

Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.