Fits (3) ratchets, (6) extensions, (2) adapters, (3) swivels, (1) magnetic handle, (1) spinner handle, (44) hex keys, (16) nut driver bits, and (33) screwdriver bits.
Accommodates the ratchets and drive accessories from version 2 of the 298-piece mechanics tool set CMMT12039. This version of the set is made in Taiwan.
22-1/4 X 14-1/2 inches
note: tools are not included
Precision CNC-cut to fit 109 Craftsman ratchets and drive tools:
1/4-drive 72-tooth ratchet (Craftsman CMMT81747)
3/8-drive 72-tooth ratchet (Craftsman CMMT81748)
1/2-drive 72-tooth ratchet (Craftsman CMMT81749)
1/4-drive spinner handle (Craftsman CMHT65078)
3-inch extension bar, 1/4-drive (Craftsman CMMT43539)
6-inch extension bar, 1/4-drive (Craftsman CMMT43531)
3-inch extension bar, 3/8-drive (Craftsman CMMT44264)
6-inch extension bar, 3/8-drive (Craftsman CMMT44261)
3-inch extension bar, 1/2-drive (Craftsman CMMT44133)
6-inch extension bar, 1/2-drive (Craftsman CMMT44131)
1/4-drive universal joint (Craftsman CMMT99216)
3/8-drive universal joint (Craftsman CMMT99291)
1/2-drive universal joint (Craftsman CMMT99294)
3/8-drive to 1/4 socket adapter (Craftsman CMMT99292)
1/2-drive to 3/8 socket adapter (Craftsman CMMT99222)
(1) Magnetic handle bit driver (Craftsman CMHT65079)
(9) inch nut driver bits from 5/32 to 7/16
(7) metric nut driver bits from 5 to 11 mm
(33) screwdriver bits in holders
(8) hex keys 1/16 to 1/4 in holder
(14) hex keys .050 to 1/4 in holder
(8) hex keys 1.5 to 6 mm in holder
(14) hex keys 1.3 to 6 mm in holder
This tool organizer was designed to fit tools from version 2 of the 298-pc Craftsman Mechanics Tool Set CMMT12039. The spinner handle and magnetic handle are updated to the new black and red style. The ratchets have slightly smaller heads and the head is assembled with screws instead of a retaining ring. The hex keys have different holders.
Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.
22-1/4 X 14-1/2 inches (inside width by inside depth)
Works in most drawers, needing no more than 2 inches of vertical clearance.
It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:
21 X 14 inches
Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.
Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.
For orders within the contiguous 48 US states.
Made in the USA!