Foam Tool Organizer for
3 Tekton Micrometer Torque Wrenches with 4 Adapters

Overview

3 Tekton Micrometer Torque Wrenches with 4 Adapters

Fits the 3-pc set TRQ95902 which includes the longer 1/2-drive torque wrench.

Sized for the 90-tooth, dual-direction, micrometer-style torque wrenches.

Only fits the newer version with the spring-loaded locking collar.

Recommended for 2-7/16 min drawer height.

Tool Notes

We have included large finger pockets at the balance point to make our foam faster than keeping torque wrenches in cases. This layout also saves a little space in the drawer. Tekton changed their micrometer-style torque wrenches in late 2025, updating to a 90-tooth head and a sliding collar which holds the setting better than the old lock knob. This layout fits the longer 1/2-drive torque wrench (40 to 300 ft-lbs) plus the 3/8-drive and 1/4-drive sizes. These three wrenches are sold as set TRQ95902. The foam also includes spots for the small adpaters that come with the torque wrenches.

Drawing

Drawing F-06427-T.pdf

Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.

Drawer Size

27 X 5-1/2 inches (inside width by inside depth)

Drawer Height

Recommended for a drawer with at least 2-7/16 inches of vertical clearance.

Minimum Trimmable Size

It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:

26-5/8 X 5-1/4 inches

Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.

Features and Benefits

• See what's missing at a glance.
• Anyone can return tools to the right spot.
• Closed-cell PE tool foam is durable and has great chemical resistance.

Standard Colors

Special Colors

We make these colors in smaller batches, but they are often in stock. Contact customer service to order.

Additional Information

Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.