Foam Tool Organizer for
5 Icon Ratchets with 25 Drive Tools, Version 2

Overview

5 Icon Ratchets with 25 Drive Tools, Version 2

Fits 5 ratchets, 3 sets of extensions, 4-pc drive adapter set, 3-pc universal joint set, and a breaker bar.

Only fits G2 ratchets.

Ratchets include 1/4-drive 72-tooth, 3/8-drive 80-tooth, 3/8 stubby, 3/8 flex head, and 1/2-drive 80-tooth.

Extensions include 6-pc 1/4-drive set, 6-pc 3/8-drive set, and 5-pc 1/2-drive set.

Tool Notes

This is an update to a popular tool organizer we've redesigned to fit the Icon G2 ratchets. It fits 5 ratchets, 3 sets of extensions (17 total), and 8 additional drive tools. The extra drive tools are an 18-inch breaker bar, the 4-pc drive adapter set, and the 3-pc universal joint set. We have listed the length of each ratchet (see the tool list on this page) because the number stamped on the ratchet didn't change for many of the G2 ratchets. Model numbers (and Harbor Freight numbers) are also provided in the tool list.

The foam size matches drawers in the 27-inch and 42-inch US General Series 3 boxes, but it can also be turned 90 degrees to fit the deeper drawers of Icon toolboxes. We shifted the tools to the front of the drawer leaving space for torque wrenches or other tools to be added along the back edge.

If you need a similar layout that fits the older G1 ratchets, see F-05835-R.

Drawing

Drawing F-06613-R.pdf

Printing the drawing at 100% scale can be an easy way to check if your tools will fit. Our drawings have multiple pages which can be printed on letter-size paper. Always change the printer setting from "fit" to 100%. If the border prints slightly too small, it is often due to this setting.

Drawer Size

22-1/4 X 19-3/8 inches (inside width by inside depth)

Drawer Height

Works in most drawers, needing no more than 2 inches of vertical clearance.

Minimum Trimmable Size

It is possible to trim the margins to fit a smaller drawer. Trimmed tool organizers are not returnable. The minimum recommended size is:

21-3/8 X 15-11/16 inches

Contact customer service to order this organizer cut on a larger sheet or trimmed to a special size.

Features and Benefits

• See what's missing at a glance.
• Anyone can return tools to the right spot.
• Closed-cell PE tool foam is durable and has great chemical resistance.

Standard Colors

Special Colors

We make these colors in smaller batches, but they are often in stock. Contact customer service to order.

Additional Information

Each FoamFit insert is designed for shadowing a specific brand and set of tools. These organizers are made from high-quality tool foam with pockets precision-cut on our CNC routers.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. The foam is resistant to most oils and fuels.